Send SMS
Contact Us

Testing Products

Rockwell Hardness Testing Machine

Rockwell Hardness Testing Machine

Approx. Rs 32,500 / Piece


Rockwell Hardness Testing Machine - TRS Series

Technical Specifications
ModelTRSTRS-150TRBTRB-250TSM
Test Loads (Kgf)60, 100, 150 (Rockwell)60, 100, 150 (Rockwell)60, 100, 150 (Rockwell) 187.5(Brinell) 187.560, 100, 150 (Rockwell) 187.5, 250(Brinell)60, 100, 150 (Rockwell) 15,30,45 (Brinell)
Intial Loads (Kgf)1010101010(Rockwell)and 3
Mx.Test Height (mm)215295215295295
Depth of Throat (mm)132148132148148
Mx.Depth of Elevating Screw Below Base (mm)230290230290290
Size of Base (mm) (Approx)430X180475X220430X180475X220475X220
Machine Height (mm)635865635865865
Nett Weight (Approx)Kg.6510565105125

Testex Snap Gauge

Testex Snap Gauge

Approx. Rs 6,980 / Piece


Testex Snap Gauge

The Testex Snap Gauge is used for the measurement of the surface profile after blasting when taken with Testex Tape / Replica Tape / Press-O-Film.

Testex Tape or Press O Film offers a simple and very accurate method of measuring blasted profiles. It can produce virtually exact replicas of the blasted surface profile, which can be measured using a snap gauge.

Hand Held simple operation. Place the Testex film firmly on the blasted surface, apply moderate pressure with the burnishing tool, the replica has now been taken and can be measured using the textex snap gage. Highly useful tool for measurements and used for pipeline & coating inspection.

Complies with ASTM, NACE and SSPC methods of measurement.

The Press-O-Film snap gauge can also be used as a micrometer for checking calibration test pieces and also thickness of flakes of paint.

Digital Surface Profile Gauge

Digital Surface Profile Gauge

Approx. Rs 14,800 / Piece


The Digital Surface Profile Gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured in accordance with the ASTM standard. Caltech’s digital surface profile gauge is highly useful and users friendly tool for paint, coating, and corrosion inspection.

The gauge is initially set to zero with the glass zero plate and the foot is then placed on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valley, allowing the gauge to display the peak to valley height. A number of measurement can be made and the average is taken

In addition, the gauge can also be used to measure the effects of corrosion i.e. pitting and cavity depth etc. The instrument is supplied with a calibration certificate traceable to national standards. Surface Profile Gauges are also known as Needle Gauge. Supplied in Carrying Case with Glass Zero Plate, Alen Key, and Battery fitted. An Analogue Surface Profile Gauge is also available.

Coatem Coating Thickness Gauge

Coatem Coating Thickness Gauge

Approx. Rs 14,500 / Piece


Coating Thickness Gauge - Coatem

We Offer Coatem Digital Coating Thickness Gauge which measures coatings on Steel & Iron. Coating Thickness Gauges utilize non-destructive priciple with most economical choice that retains the uncompromising quality of Coating Inspection Instruments.

Digital Coating Thickness Gauge has built in keys to restore calibration at any place. User can calibrate instrument using standard foils of various thickness of his choice. Full electronic instrument with legible display for easy redeability. Coating Thickness gauge is best way to check dry film thickness of non magnetic organic coating on ferrous substrates.

Highly compact, handy instrument measures paint / coating thickness on steel surface based on selected model. Paint Thickness Gauge measures non-magnetic coatings on steel. Paint thickness meter has flexible probe and therefore can be used to test almost all types of locations. Special adapter with curvature adapter is used for testing coating on rods and wires above 6mm diameter. Coating thickness gage is provided in compact box for safe storage of instrument along with standard calibration foils, zero block and operating manual.

Paint thickness gauge / DFT gauge is widely used in India by:


Additional Features:

We have number of models as per choice of customer . For further details please contact us.

Fluke Digital Clamp Meter

Fluke Digital Clamp Meter

Approx. Rs 6,850 / Piece


Fluke 321/322 Clamp Meters

Voltage DC
Range:0 - 400 V (Fluke 322 only)
Resolution:Resolution:
Range:0 - 600 V (Fluke 322 only)
Resolution:1 V
Accuracy:1% ± 5 counts
Voltage DC Range
Range:0 - 400 V
Resolution:0.1 V
Range:0 - 600 V
Resolution:1 V
Accuracy:1.2% ± 5 counts (50 - 400 Hz)
AC Response:Averaging
Current AC
Range:0 - 400 A
Resolution:0.1 A
Range:0 - 40 A (Fluke 322 only)
Resolution:0.01 A
Accuracy:1.8% ± 5 counts (50 - 60 Hz)
Accuracy:3.0% ± 5 counts (60 - 400 Hz)
AC Response:Averaging
Resistance
Range:0 - 400 Ω
Resolution:0.1 Ω
Accuracy:1% ± 5 counts
Continuity<= 30 Ω
Environmental Specifications
Operating Temperature-10°C to +50°C
Storage Temperature-30 ºC to +60 ºC
Operating Altitude2,000 meters
Temperature De-ratingAdd 0.1 x specified accuracy for each ºC above 28ºC or below 18ºC

LED Telescopic Inspection Mirror

LED Telescopic Inspection Mirror

Approx. Rs 2,980 / Piece


LED Lighted Telescopic Inspection Mirror

LED Light illuminates dark areas for perfect inspection now available in India

LED Telescopic Inspection mirrors are known for their seemingly limitless uses for automotive and industrial applications. This inspection mirror is perfect to be used to look under tanks, machinery and vehicles without getting down on the floor. Easy operation in dark areas or night time. Telescopic Inspection Mirror is a great combination tool that allows you to inspect areas under machinery, automobiles and other equipment, and more easily pick up items that have fallen or rolled underneath. Also available round or rectangular sizes.

Surface Digital Hardness Tester

Surface Digital Hardness Tester

Approx. Rs 39,850 / Piece


Surface hardness tester

Item Code: TH-130

Surface hardness testers are one of the demanded products of our company. We have dedicated and experienced team of professionals, who never compromises in the quality of the product and they conduct regular quality check sessions at each level of manufacturing process in order to provide effective and faultless products to our valued clients. These Testers are available in superior quality.

The features of these are:-

 


Specifications:

Standard Impact DeviceD integrated
Hardness scalesHLD, HB, HRC, HRB, HRA, HV, HS
Measuring range / materialsSee table above
Accuracy± 6HLD(760 ± 30HLD)
Memory99 average readings
OutputRS232 to printer
Min. Surface Roughness of Workpiece1.6 p m ( Ra)
Max. Work piece Hardness900HLD
Min. radius of Workpiece (convex/concave)Rmin = 50mm( with support ring Rmin= 10mm)
Min. Workpiece weight2~5kg on stable support 0.05~2kg with compact coupling
Min. Workpiece thickness coupled5mm
Min. Thickness of hardened layers0.8mm
Indentation depthImpact Devices data (See page 8)
Continuous working time8h
PowerRechargeable Li-Polymer batteries
Operating temperature0-40'C
Overall dimensions155 x 24 x 55mm
Weight180 g

Needle Probe Hardness Tester

Needle Probe Hardness Tester

Approx. Rs 55,000 / Piece


Hardness tester equipment

 

Item Code: TH-134

Apart from these, we are also engaged in offering an extensive collection of hardness Tester equipments to our esteemed clients. These products are mainly used for testing the hardness of the equipment in an effective manner. These equipments are run with the use of electricity and consume low electricity. We also provide customized solutions as per the customer requirement.

The features of these are:-

 


Specifications:

Standard Impact deviceDL integrated
Hardness scalesHLDL.HB. HRC. HRB, HV, HS
Measuring range / materialsSee table above
Accuracy±12HLDL
Memory99 average readings
OutputRS232 to printer
Mim. Surface Roughness of Workpiece1.6 M m(Ra) Diameter = 2.8mm
Needle front section of DL-deviceLength = 50mm
Max. Workpiece hardness950HLDL
Min radius of Workpiece (convex/concave)Rmin= 10mm
Min. Workpiece weight2~5kg on stable support 0.05-2kg with compact coupling
Min Workpiece. thickness coupled5mm
Min. thickness of hardened layer0.8mm
Indentation depthImpact devices data (see page 8)
Continuous Working time8h
Powerrechargeable NiMH battery
Operating temperature0-40'C
Overall dimensions210X24X 55mm

Digital Portable Metal Hardness Tester

Digital Portable Metal Hardness Tester

Approx. Rs 35,500 / Piece


Metal Hardness Tester

 

Item Code: TH-160

Being the eminent manufacturer, exporter and supplier of hardness testers, now offering a wide range of metal hardness testers to our valued clients. These testers are fabricated with high grade metals and these metals are procured from the reliable vendors in the market. These Testers are well tested by our experts who are totally experienced in this field. We provide quality products in affordable rates.

The features of these are:-

 

 

Specifications:

Hardness scaleHL, HRC, HRB, HV, HB, HS
Memory240-1000 groups (Impacf times: 32-1)
Measuring rangeSee next page
Tensile strength U.T.S. range374-2652 FVLPA
Accuracy± 6HLD (760 ± 30HLD) error of displayed value 6HLD (760 ± 30HLD) repeatability of displayed value
Statistics functionAverage / Max / Min value calculation, limits setting and alarm
Standard Impact DeviceD
Optional Impact DevicesDC/DUC/D+15/G (see page 8)
Max. Work piece Hardness996HV(For Impact Devices D/DC/DL/D+15/C) 646HB(For Impact Device G)
Min. Radius of Workpiece (convex/concave]Rmin = 50mm (with support ring Rmin= 10mm)
Min. Workpiece weight2~5kg on stable support 0.05~2kg with compact coupling
Min. Workpiece thickness5mm (Impact Device D/DC/DL/D+15) 1mm (Impact Device C) 10mm (Impact Device G)
Mm. thickness of hardened Surface0.8mm
PowerRechargeable Li Battery, pile for TH160
Continuous Working timeAbout I00h (no printing and backlight)
Charging time2.5-4 hours
Operating temperature0~40'C
Relative humidity< 90%
Overall dimensions230 x 90 x 46.5mm
Weight420g (including Impact Device and printer)

Fluke 1503 Insulation Resistance Tester

Fluke 1503 Insulation Resistance Tester

Approx. Rs 32,000 / Piece


Insulation resistance testing in the palm of your hand

Insulation resistance testers can be used to determine the integrity of windings or cables in motors, transformers, switchgear, and electrical installations.

The Fluke 1503 Insulation Resistance Tester is compact, rugged, reliable, and easy to use. With its multiple test voltages, the Fluke 1503 is ideal for many troubleshooting, commissioning, and preventative maintenance applications.

For more capabilites look at the Fluke 1507 Insulation Resistance Tester

What's Included:

Coating Thickness Gauge - Coatem-NF

Coating Thickness Gauge - Coatem-NF

Approx. Rs 18,500 / Piece


Coating Thickness Gauge - Coatem-NF

We Offer budget priced, pocket sized coating thickness meter in the market with a user friendly display for operation at all locations flat or round or odd shaped.

Easy to use by any operator with single keypad operation and automatic switch off when no reading is being taken. The instrument is highly popular and used by powder coating applicators, fabrication industries. Coatem-NF coating thickness gauges utilize this non-destructive priciple when measuring coatings on non-magnetic substrates such as aluminum, aluminum alloys, bronze, copper, brass tin and rustproof weak magnetic steels. The coatings must be electrically insulating such as; paint, enamel, plastics, anodized coatings, metal spray, powder coating and ceramics etc.

Coatem-NF digital coating thickness meter is available with a constant pressure and detachable flexible probe. The flexible probe is capable of measuring intermittently on hot work and all nearby locations including critical compnents. Shape of components does not matter.

Conforms to BS, ISO, DIN, ASTM and SSPC methods of measurement. Calibration certificates having traceability are available.

Coating thickness gauge is supplied complete ready to use with carrying case, set of precision measured calibration foils, precision zero block and battery fitted

Coatem-NF coating thickness gauge instrument has measuring range upto 1500 microns with resolution of 1 micron, accuracy ±2 %, weight 170 gms. The gage is compact size, auto shut-off, low battery indications and operated on 9V battery. Coatem-NF coating thickness gauge is supplied in carrying case along with calibration standards and zero block of stainless steel or aluminum. Various other models are also available as per choice.For detailed data sheet and pricing please contact us.

Multi Mode Through Paint Digital Ultrasonic Thickness Gauge

Multi Mode Through Paint Digital Ultrasonic Thickness Gauge

Approx. Rs 42,500 / Piece


Multi-Mode Digital Portable Ultrasonic Thickness Gauge Multi-mode: Pulse-Echo mode and Echo-Echo mode


We Offer a multi-mode ultrasonic thickness gauge. Based on the same operating principles as SONAR, the instrument is capable of measuring the thickness of various materials with accuracy as high as 0.1/0.01 millimeters.

The multi-mode feature of the gauge allows the user to toggle between pulse-echo mode (flaw and pit detection), and echo-echo mode (eliminate paint or coating thickness).

Product Specifications

Standard Configuration

1

Main body

1

 

2

Probe P5EE(5MHz)

1

 

3

Couplant

1

 

4

Instrument Case

1

 

5

Operating Manual

1

 

6

Alkaline battery

2

AA size


Additional Information:

Shore A Rubber Hardness Tester

Shore A Rubber Hardness Tester

Approx. Rs 6,850 / Piece


BSE ltd. Manufactures a wide variety of durometers for polymers, composites and like materials to measure hardness of natural and synthetic rubber products, acrylics, acetates, polymers, thermoplastics, pvc, hardboards, wood, fruits and many other non standard materials.

Round type analog durometers have a dial graduated from 0 to 100 spread across 360 degrees thereby making it easily readable and accurate in measured values.

The circular durometers are provided with a maximum indicating hand for determination of creep properties of materials under test. The circular durometer shore a is supplied with a unique 3-in-1 test gauge to check the accuracy of durometers at 25,50 and 75 hardness nos.

Additional Information:
X
Provide Us More Details
Is this Requirement:

One Time Regular

How soon do you want this:

Immediate After 1 month

Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Testing Products ?

country-ico

We will contact you soon !

Taher S

(Director)

Bombay Tools Center Bombay Pvt Ltd

Mumbai, Maharashtra, India

More Categories

View All Categories »
Send SMS
Contact Us